Agent skill

Cncsetup

Generate standardized CNC setup sheets for MNMUK machine shop. Covers DMG MORI mills/lathes, CITIZEN Swiss, MITSUBISHI EDM, and Haas machines. USE WHEN user says 'setup sheet', 'create setup', 'job setup', 'machine setup', 'tooling list', 'fixture setup', or 'new job' for any CNC operation.

View SKILL.md on GitHub Repository
Stars 0
Forks 0

Install this agent skill to your Project

npx add-skill https://github.com/robdtaylor/personal-ai-infrastructure/tree/main/skills/CNCSetup

SKILL.md

CNCSetup - MNMUK Setup Sheet Generator

Purpose: Standardized setup documentation to reduce setup time, prevent errors, and capture tribal knowledge.

When to Activate

  • "Create a setup sheet for [part/job]"
  • "Setup for [machine name]"
  • "New job setup on the NLX2500"
  • "Tooling list for [operation]"
  • "Document the setup for [part number]"

Setup Sheet Templates by Machine Type

DMG MORI 5-AXIS MILLS (NMV3000, DMU50, NHX500)

markdown
# SETUP SHEET - 5-AXIS MILLING

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Customer | |
| Operation | |
| Machine | [ ] NMV3000  [ ] DMU50  [ ] NHX500 |
| Program Number | |
| Setup By | |
| Date | |

## Workholding
| Item | Details |
|------|---------|
| Fixture ID | |
| Fixture Location | |
| Clamping Method | |
| Clamping Torque | Nm |
| Pallet Number | |
| Datum/WCS | G54 / G55 / Other: |

## Work Offset Setup
| Axis | Value | Method |
|------|-------|--------|
| X | | Probe / Edge finder / Indicator |
| Y | | Probe / Edge finder / Indicator |
| Z | | Probe / Tool setter |
| A | | |
| B/C | | |

## Tool List
| T# | Description | Diameter | Length | Offset | Notes |
|----|-------------|----------|--------|--------|-------|
| T1 | | | | H1 D1 | |
| T2 | | | | H2 D2 | |
| T3 | | | | H3 D3 | |
| T4 | | | | H4 D4 | |
| T5 | | | | H5 D5 | |

## CELOS Settings
| Parameter | Value |
|-----------|-------|
| Spindle Warm-up | [ ] Required  [ ] Not Required |
| Coolant Type | [ ] Flood  [ ] Through-spindle  [ ] Mist |
| Coolant Pressure | bar |
| Chip Conveyor | [ ] On  [ ] Off |

## Critical Dimensions (First-Off Check)
| Feature | Nominal | Tolerance | Actual | OK |
|---------|---------|-----------|--------|-----|
| | | ± | | [ ] |
| | | ± | | [ ] |
| | | ± | | [ ] |

## Safety & Notes
- [ ] Guards in place
- [ ] Correct PPE worn
- [ ] Program proven at reduced feed

### Special Instructions:


### Known Issues / Tips:

DMG MORI TURNING CENTRES (NLX2500, ALX2000)

markdown
# SETUP SHEET - CNC TURNING

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Customer | |
| Operation | OP10 / OP20 / Complete |
| Machine | [ ] NLX2500 Twin  [ ] NLX2500 Single  [ ] ALX2000 |
| Program Number | |
| Setup By | |
| Date | |

## Material & Stock
| Item | Details |
|------|---------|
| Material | |
| Stock Type | [ ] Bar  [ ] Billet  [ ] Forging  [ ] Casting |
| Stock Size | Ø x L mm |
| Bar Feeder | [ ] Yes  [ ] No |
| Bar Stop Position | mm from chuck face |

## Workholding - Main Spindle
| Item | Details |
|------|---------|
| Chuck Type | [ ] 3-jaw  [ ] Collet  [ ] Special |
| Chuck ID/Size | |
| Jaw Type | [ ] Hard  [ ] Soft  [ ] Pie jaws |
| Jaw Bore | Ø mm |
| Grip Length | mm |
| Clamping Pressure | bar |

## Workholding - Sub Spindle (if applicable)
| Item | Details |
|------|---------|
| Chuck Type | [ ] 3-jaw  [ ] Collet |
| Jaw Type | [ ] Hard  [ ] Soft |
| Grip Length | mm |
| Part-off Position | mm |
| Transfer Method | |

## Work Offset Setup
| Offset | Value | Method |
|--------|-------|--------|
| Z (Face) | | Touch-off / Probe |
| X (Diameter) | | Test cut / Probe |

## Tool List - Turret
| T# | Station | Description | Insert | Orientation | Offset | Notes |
|----|---------|-------------|--------|-------------|--------|-------|
| T1 | | | | | | |
| T2 | | | | | | |
| T3 | | | | | | |
| T4 | | | | | | |

## Live Tooling (if applicable)
| T# | Station | Description | RPM | Notes |
|----|---------|-------------|-----|-------|
| | | | | |

## Cutting Parameters Reference
| Operation | Speed (m/min) | Feed (mm/rev) | DOC (mm) |
|-----------|---------------|---------------|----------|
| Rough OD | | | |
| Finish OD | | | |
| Rough ID | | | |
| Finish ID | | | |
| Thread | | | |
| Part-off | | | |

## Coolant Settings
| Parameter | Value |
|-----------|-------|
| Coolant Type | [ ] Flood  [ ] High-pressure |
| HP Coolant Pressure | bar |
| Chip Conveyor | [ ] On  Direction: |

## Critical Dimensions (First-Off)
| Feature | Nominal | Tolerance | Actual | OK |
|---------|---------|-----------|--------|-----|
| OD 1 | Ø | ± | | [ ] |
| OD 2 | Ø | ± | | [ ] |
| Length | | ± | | [ ] |
| Thread | | Class | | [ ] |

## Cycle Time
| Phase | Time |
|-------|------|
| Load | sec |
| Cut Cycle | sec |
| Unload | sec |
| **Total** | sec |

### Special Instructions:


### Known Issues / Tips:

HARDINGE TWIN SPINDLE TURNING

markdown
# SETUP SHEET - HARDINGE TURNING

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Operation | |
| Program Number | |
| Setup By | |
| Date | |

## Stock
| Item | Details |
|------|---------|
| Material | |
| Stock Size | Ø x L mm |
| Bar Feed | [ ] Yes  [ ] No |

## Workholding
| Spindle | Chuck | Collet/Jaw | Grip | Pressure |
|---------|-------|------------|------|----------|
| Main | | | mm | bar |
| Sub | | | mm | bar |

## Precision Notes (±0.003mm capability)
| Parameter | Setting |
|-----------|---------|
| Warm-up Cycle | [ ] Required - Run time: min |
| Temperature Stability | [ ] Verified |
| Probe Calibration | [ ] Verified |

## Tool List
| T# | Description | Insert | Offset | Notes |
|----|-------------|--------|--------|-------|
| | | | | |

## Critical Dimensions
| Feature | Nominal | Tol | Gage | Method |
|---------|---------|-----|------|--------|
| | | ±0.003 | | |

### Precision Tips:
- Allow 20-min spindle warm-up for best tolerance
- Verify coolant temperature stable
- Use in-process gauging for critical features

CITIZEN SWISS-TYPE (Sliding Head)

markdown
# SETUP SHEET - CITIZEN SWISS

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Machine | [ ] Citizen Laser Head  [ ] Citizen LFV |
| Program Number | |
| Setup By | |
| Date | |

## Material & Bar Stock
| Item | Details |
|------|---------|
| Material | |
| Bar Diameter | Ø mm (max Ø38.1mm) |
| Bar Length | mm |
| Bar Supplier/Heat | |

## Guide Bushing Setup
| Parameter | Value |
|-----------|-------|
| Guide Bushing Size | Ø mm |
| Bushing Type | [ ] Rotating  [ ] Fixed |
| Bushing Material | [ ] Carbide  [ ] Bronze |
| Z-axis Reference | mm |

## Main Spindle Collet
| Parameter | Value |
|-----------|-------|
| Collet Size | Ø mm |
| Clamping Pressure | bar |
| Stock Stick-out | mm |

## Sub Spindle Setup
| Parameter | Value |
|-----------|-------|
| Collet Size | Ø mm |
| Pickup Position | Z = mm |
| Grip Length | mm |

## Tool List - Gang Slide
| Position | Tool | Insert/Size | Offset | Notes |
|----------|------|-------------|--------|-------|
| | | | | |
| | | | | |
| | | | | |

## Tool List - Back Working
| Position | Tool | Insert/Size | Notes |
|----------|------|-------------|-------|
| | | | |
| | | | |

## LFV Settings (if LFV machine)
| Parameter | Value |
|-----------|-------|
| LFV Mode | [ ] On  [ ] Off |
| Oscillation Frequency | Hz |
| Amplitude | mm |
| Applied To | [ ] OD  [ ] ID  [ ] Drilling |

## Laser Head Settings (if Laser machine)
| Parameter | Value |
|-----------|-------|
| Laser Operation | [ ] Marking  [ ] Cutting  [ ] N/A |
| Power | W |
| Program | |

## Coolant
| Type | Setting |
|------|---------|
| Oil Type | |
| Pressure | bar |
| Mist | [ ] On  [ ] Off |

## Critical Dimensions (±0.003mm capability)
| Feature | Nominal | Tol | Method |
|---------|---------|-----|--------|
| | | ± | |
| | | ± | |

## Cycle Time Target
| | Time |
|--|------|
| Cycle | sec |
| Parts/Hour | |

### Swiss-Specific Tips:
- Verify guide bushing alignment before production
- Check oil level and filtration
- LFV excellent for 316SS and titanium chip breaking
- Monitor bar remnant length

MITSUBISHI EDM (Wire & Spark)

markdown
# SETUP SHEET - EDM

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Machine | [ ] Wire EDM  [ ] Spark EDM |
| Program Number | |
| Setup By | |
| Date | |

## Workpiece
| Item | Details |
|------|---------|
| Material | |
| Hardness | HRC |
| Dimensions | L x W x H mm |
| Weight | kg |

---

## WIRE EDM SETUP

### Wire Settings
| Parameter | Value |
|-----------|-------|
| Wire Type | [ ] Brass  [ ] Coated  [ ] Other: |
| Wire Diameter | mm |
| Wire Tension | g |
| Wire Speed | m/min |

### Workholding
| Item | Details |
|------|---------|
| Fixture Type | |
| Leveling | [ ] Verified |
| Start Hole | X: Y: (if applicable) |

### Cutting Parameters
| Pass | Power | On-Time | Off-Time | Wire Speed | Offset |
|------|-------|---------|----------|------------|--------|
| Rough | | μs | μs | m/min | mm |
| Semi | | μs | μs | m/min | mm |
| Finish | | μs | μs | m/min | mm |
| Skim | | μs | μs | m/min | mm |

### Flushing
| Parameter | Value |
|-----------|-------|
| Upper Nozzle | mm gap |
| Lower Nozzle | mm gap |
| Flushing Pressure | bar |
| Submerged | [ ] Yes  [ ] No |

---

## SPARK EDM (SINKER) SETUP

### Electrode
| Parameter | Value |
|-----------|-------|
| Electrode Material | [ ] Copper  [ ] Graphite |
| Electrode ID | |
| Undersize | mm |
| Polarity | [ ] +  [ ] - |

### Cutting Parameters
| Phase | Current | On-Time | Off-Time | Depth |
|-------|---------|---------|----------|-------|
| Rough | A | μs | μs | mm |
| Semi | A | μs | μs | mm |
| Finish | A | μs | μs | mm |

### Flushing
| Method | Setting |
|--------|---------|
| Type | [ ] Jet  [ ] Suction  [ ] Orbital |
| Pressure | bar |
| Retract Height | mm |
| Jump Frequency | |

---

## Dielectric
| Parameter | Value |
|-----------|-------|
| Type | |
| Level | [ ] Verified |
| Filter Status | [ ] OK |
| Conductivity | μS |

## Critical Dimensions (Wire: ±0.004mm, Spark: ±0.050mm)
| Feature | Nominal | Tol | Actual | OK |
|---------|---------|-----|--------|-----|
| | | ± | | [ ] |

### EDM Tips:
- Wire: Check wire path and guides before start
- Spark: Verify electrode alignment with workpiece
- Monitor dielectric condition
- Log electrode wear for repeat jobs

HAAS FAST RESPONSE CELL (Mini Mill & Tool Room Lathe)

markdown
# SETUP SHEET - HAAS FAST RESPONSE

## Job Information
| Field | Value |
|-------|-------|
| Part Number | |
| Part Name | |
| Machine | [ ] Mini Mill  [ ] Tool Room Lathe |
| Program Number | |
| Setup By | |
| Date | |
| Priority | [ ] Urgent  [ ] Standard |

## Purpose
[ ] Prototype  [ ] First Article  [ ] Repair  [ ] One-off  [ ] Prove-out

---

## MINI MILL SETUP

### Workholding
| Item | Details |
|------|---------|
| Vice/Fixture | |
| Parallels | Height: mm |
| Stop Position | |
| WCS | G54 |

### Tool List
| T# | Description | Diameter | Length | Notes |
|----|-------------|----------|--------|-------|
| T1 | | | | |
| T2 | | | | |
| T3 | | | | |

### Work Offsets
| Axis | Value | Method |
|------|-------|--------|
| X | | Edge finder |
| Y | | Edge finder |
| Z | | Tool touch |

---

## TOOL ROOM LATHE SETUP

### Workholding
| Item | Details |
|------|---------|
| Chuck | [ ] 3-jaw  [ ] Collet  [ ] Other |
| Stock | Ø x L mm |
| Stick-out | mm |

### Tool List
| T# | Description | Offset | Notes |
|----|-------------|--------|-------|
| T1 | | | |
| T2 | | | |
| T3 | | | |

---

## Notes (±0.050mm typical tolerance)

### Special Instructions:


### For Production Transfer:
Machine recommended:
Key learnings from prototype:

Setup Sheet Best Practices

Before Setup

  1. Review drawing and previous setup sheets
  2. Gather all tooling, fixtures, gages
  3. Verify program revision matches drawing
  4. Check raw material matches specification

During Setup

  1. Follow setup sheet step-by-step
  2. Document any deviations
  3. Verify tool lengths and offsets
  4. Run first part at reduced feed (50%)

After Setup

  1. First-off inspection - all critical dimensions using appropriate measurement equipment:
    • Calipers (digital vernier) for general dimensions
    • Micrometers (OD/ID) for tight tolerances
    • CMM for complex geometry or GD&T features
    • Thread gauges (Go/No-Go) for threaded features
    • Bore gauges for internal diameters
    • Height gauge for length/step features
  2. Update setup sheet with any changes
  3. Record actual cycle time
  4. Note any issues or improvements

Continuous Improvement

  • Add "Tips" from experienced operators
  • Update tooling recommendations based on results
  • Photo key setup steps for complex jobs
  • Track setup time for benchmarking

Output Format

When generating a setup sheet, I will:

  1. Ask which machine/job if not specified
  2. Generate appropriate template
  3. Pre-fill known information
  4. Highlight fields requiring operator input
  5. Include relevant tips from tribal knowledge

CRITICAL OUTPUT RULES:

  • ALWAYS output the complete tool list table — never truncate or cut off mid-row. Every tool entry must show T#, description, diameter/size, offset reference, and notes columns fully populated or marked as blank (e.g., "-").
  • Minimum 5 tool rows must be shown in every tool list table, even if some rows are empty placeholders.
  • ALWAYS output the complete workholding/fixture section with type, orientation, clamping method, and torque/pressure fields.
  • Do not abbreviate or summarise any table — output every row and every column in full.
  • If the setup sheet is long, continue until every section is complete. Do not stop early.

Integration with Other Skills

  • PlantCapability: Verify machine selection before setup
  • AutomotiveManufacturing: Link setup sheets to work instructions
  • TribalKnowledge: Pull tips and known issues into setup sheets

Recommended Agent Skills

Expand your agent's capabilities with these related and highly-rated skills.

robdtaylor/personal-ai-infrastructure

Costengineering

Manufacturing cost accounting, analysis, and reduction for automotive operations. Covers overhead/burden rate calculation, variance analysis, make vs buy decisions, value engineering, and cycle time to cost conversion. USE WHEN user says 'cost analysis', 'overhead rate', 'burden rate', 'variance analysis', 'make vs buy', 'value engineering', 'cost reduction', 'should cost', 'labour rate', or needs manufacturing cost guidance.

0 0
Explore
robdtaylor/personal-ai-infrastructure

Eightd

Structured 8D problem solving for customer complaints and quality issues. D0-D8 phases with containment, root cause analysis, and escape point identification. USE WHEN user says '8D', 'eight disciplines', 'customer complaint', 'corrective action', 'root cause analysis', 'containment', 'escape point', or 'problem solving report'.

0 0
Explore
robdtaylor/personal-ai-infrastructure

Toolcrib

Tool inventory management for MNMUK machine shop. Tracks tooling, inserts, consumables with reorder points and usage. USE WHEN user asks 'tool inventory', 'what inserts', 'reorder', 'tool crib', 'do we have', 'tooling cost', or 'tool usage'.

0 0
Explore
robdtaylor/personal-ai-infrastructure

Damperassembly

Dept 71 damper assembly operations for DSSV (Dynamic Suspensions Spool Valve) dampers. Covers component receipt, sub-assembly, fluid fill, gas charging, functional testing, and troubleshooting. USE WHEN user says 'damper', 'Dept 71', 'DSSV', 'spool valve', 'damper assembly', 'damper test', 'dyno test', 'fluid fill', 'gas charge', or needs damper-specific guidance.

0 0
Explore
robdtaylor/personal-ai-infrastructure

Skillsmatrix

Operator training and competency tracking for MNMUK machine shop. Supports IATF 16949 competency requirements and workforce planning. USE WHEN user asks 'who can run', 'training matrix', 'competency', 'skills matrix', 'operator certification', 'who is trained on', or workforce planning questions.

0 0
Explore
robdtaylor/personal-ai-infrastructure

Cuttingparams

Cutting parameter lookup and optimization for CNC machining. Covers feeds, speeds, depths of cut for common materials and operations. USE WHEN user asks 'feeds and speeds', 'cutting parameters', 'SFM for', 'what RPM', 'feed rate for', 'DOC for', or needs machining parameter guidance.

0 0
Explore

Didn't find tool you were looking for?

Be as detailed as possible for better results