Agent skill

acquiring-disk-image-with-dd-and-dcfldd

Create forensically sound bit-for-bit disk images using dd and dcfldd while preserving evidence integrity through hash verification.

View SKILL.md on GitHub Repository
Stars 0
Forks 0

Install this agent skill to your Project

npx add-skill https://github.com/autohandai/community-skills/tree/main/acquiring-disk-image-with-dd-and-dcfldd

SKILL.md

Acquiring Disk Image with dd and dcfldd

When to Use

  • When you need to create a forensic copy of a suspect drive for investigation
  • During incident response when preserving volatile disk evidence before analysis
  • When law enforcement or legal proceedings require a verified bit-for-bit copy
  • Before performing any destructive analysis on a storage device
  • When acquiring images from physical drives, USB devices, or memory cards

Prerequisites

  • Linux-based forensic workstation (SIFT, Kali, or any Linux distro)
  • dd (pre-installed on all Linux systems) or dcfldd (enhanced forensic version)
  • Write-blocker hardware or software write-blocking configured
  • Destination drive with sufficient storage (larger than source)
  • Root/sudo privileges on the forensic workstation
  • SHA-256 or MD5 hashing utilities (sha256sum, md5sum)

Workflow

Step 1: Identify the Target Device and Enable Write Protection

bash
# List all connected block devices to identify the target
lsblk -o NAME,SIZE,TYPE,MOUNTPOINT,MODEL

# Verify the device details
fdisk -l /dev/sdb

# Enable software write-blocking (if no hardware blocker)
blockdev --setro /dev/sdb

# Verify read-only status
blockdev --getro /dev/sdb
# Output: 1 (means read-only is enabled)

# Alternatively, use udev rules for persistent write-blocking
echo 'SUBSYSTEM=="block", ATTRS{serial}=="WD-WCAV5H861234", ATTR{ro}="1"' > /etc/udev/rules.d/99-writeblock.rules
udevadm control --reload-rules

Step 2: Prepare the Destination and Document the Source

bash
# Create case directory structure
mkdir -p /cases/case-2024-001/{images,hashes,logs,notes}

# Document source drive information
hdparm -I /dev/sdb > /cases/case-2024-001/notes/source_drive_info.txt

# Record the serial number and model
smartctl -i /dev/sdb >> /cases/case-2024-001/notes/source_drive_info.txt

# Pre-hash the source device
sha256sum /dev/sdb | tee /cases/case-2024-001/hashes/source_hash_before.txt

Step 3: Acquire the Image Using dd

bash
# Basic dd acquisition with progress and error handling
dd if=/dev/sdb of=/cases/case-2024-001/images/evidence.dd \
   bs=4096 \
   conv=noerror,sync \
   status=progress 2>&1 | tee /cases/case-2024-001/logs/dd_acquisition.log

# For compressed images to save space
dd if=/dev/sdb bs=4096 conv=noerror,sync status=progress | \
   gzip -c > /cases/case-2024-001/images/evidence.dd.gz

# Using dd with a specific count for partial acquisition
dd if=/dev/sdb of=/cases/case-2024-001/images/first_1gb.dd \
   bs=1M count=1024 status=progress

Step 4: Acquire Using dcfldd (Preferred Forensic Method)

bash
# Install dcfldd if not present
apt-get install dcfldd

# Acquire image with built-in hashing and split output
dcfldd if=/dev/sdb \
   of=/cases/case-2024-001/images/evidence.dd \
   hash=sha256,md5 \
   hashwindow=1G \
   hashlog=/cases/case-2024-001/hashes/acquisition_hashes.txt \
   bs=4096 \
   conv=noerror,sync \
   errlog=/cases/case-2024-001/logs/dcfldd_errors.log

# Split large images into manageable segments
dcfldd if=/dev/sdb \
   of=/cases/case-2024-001/images/evidence.dd \
   hash=sha256 \
   hashlog=/cases/case-2024-001/hashes/split_hashes.txt \
   bs=4096 \
   split=2G \
   splitformat=aa

# Acquire with verification pass
dcfldd if=/dev/sdb \
   of=/cases/case-2024-001/images/evidence.dd \
   hash=sha256 \
   hashlog=/cases/case-2024-001/hashes/verification.txt \
   vf=/cases/case-2024-001/images/evidence.dd \
   verifylog=/cases/case-2024-001/logs/verify.log

Step 5: Verify Image Integrity

bash
# Hash the acquired image
sha256sum /cases/case-2024-001/images/evidence.dd | \
   tee /cases/case-2024-001/hashes/image_hash.txt

# Compare source and image hashes
diff <(sha256sum /dev/sdb | awk '{print $1}') \
     <(sha256sum /cases/case-2024-001/images/evidence.dd | awk '{print $1}')

# If using split images, verify each segment
sha256sum /cases/case-2024-001/images/evidence.dd.* | \
   tee /cases/case-2024-001/hashes/split_image_hashes.txt

# Re-hash source to confirm no changes occurred
sha256sum /dev/sdb | tee /cases/case-2024-001/hashes/source_hash_after.txt
diff /cases/case-2024-001/hashes/source_hash_before.txt \
     /cases/case-2024-001/hashes/source_hash_after.txt

Step 6: Document the Acquisition Process

bash
# Generate acquisition report
cat << 'EOF' > /cases/case-2024-001/notes/acquisition_report.txt
DISK IMAGE ACQUISITION REPORT
==============================
Case Number: 2024-001
Date/Time: $(date -u +"%Y-%m-%d %H:%M:%S UTC")
Examiner: [Name]

Source Device: /dev/sdb
Model: [from hdparm output]
Serial: [from hdparm output]
Size: [from fdisk output]

Acquisition Tool: dcfldd v1.9.1
Block Size: 4096
Write Blocker: [Hardware/Software model]

Image File: evidence.dd
Image Hash (SHA-256): [from hash file]
Source Hash (SHA-256): [from hash file]
Hash Match: YES/NO

Errors During Acquisition: [from error log]
EOF

# Compress logs for archival
tar -czf /cases/case-2024-001/acquisition_package.tar.gz \
   /cases/case-2024-001/hashes/ \
   /cases/case-2024-001/logs/ \
   /cases/case-2024-001/notes/

Key Concepts

Concept Description
Bit-for-bit copy Exact replica of source including unallocated space and slack space
Write blocker Hardware or software mechanism preventing writes to evidence media
Hash verification Cryptographic hash comparing source and image to prove integrity
Block size (bs) Transfer chunk size affecting speed; 4096 or 64K typical for forensics
conv=noerror,sync Continue on read errors and pad with zeros to maintain offset alignment
Chain of custody Documented trail proving evidence has not been tampered with
Split imaging Breaking large images into smaller files for storage and transport
Raw/dd format Bit-for-bit image format without metadata container overhead

Tools & Systems

Tool Purpose
dd Standard Unix disk duplication utility for raw imaging
dcfldd DoD Computer Forensics Laboratory enhanced version of dd with hashing
dc3dd Another forensic dd variant from the DoD Cyber Crime Center
sha256sum SHA-256 hash calculation for integrity verification
blockdev Linux command to set block device read-only mode
hdparm Drive identification and parameter reporting
smartctl S.M.A.R.T. data retrieval for drive health and identification
lsblk Block device enumeration and identification

Common Scenarios

Scenario 1: Acquiring a Suspect Laptop Hard Drive Connect the drive via a Tableau T35u hardware write-blocker, identify as /dev/sdb, use dcfldd with SHA-256 hashing, split into 4GB segments for DVD archival, verify hashes match, document in case notes.

Scenario 2: Imaging a USB Flash Drive from a Compromised Workstation Use software write-blocking with blockdev --setro, acquire with dcfldd including MD5 and SHA-256 dual hashing, image is small enough for single file, verify and store on encrypted case drive.

Scenario 3: Remote Acquisition Over Network Use dd piped through netcat or ssh for remote acquisition: ssh root@remote "dd if=/dev/sda bs=4096" | dd of=remote_image.dd bs=4096, hash both ends independently to verify transfer integrity.

Scenario 4: Acquiring from a Failing Drive Use ddrescue first to recover readable sectors, then use dd with conv=noerror,sync to fill gaps with zeros, document which sectors were unreadable in the error log.

Output Format

Acquisition Summary:
  Source:       /dev/sdb (500GB Western Digital WD5000AAKX)
  Destination:  /cases/case-2024-001/images/evidence.dd
  Tool:         dcfldd 1.9.1
  Block Size:   4096 bytes
  Duration:     2h 15m 32s
  Bytes Copied: 500,107,862,016
  Errors:       0 bad sectors
  Source SHA-256:  a3f2b8c9d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0c1d2e3f4a5b6c7d8e9f0a1
  Image SHA-256:   a3f2b8c9d4e5f6a7b8c9d0e1f2a3b4c5d6e7f8a9b0c1d2e3f4a5b6c7d8e9f0a1
  Verification:    PASSED - Hashes match

Recommended Agent Skills

Expand your agent's capabilities with these related and highly-rated skills.

autohandai/community-skills

mapping-mitre-attack-techniques

Maps observed adversary behaviors, security alerts, and detection rules to MITRE ATT&CK techniques and sub-techniques to quantify detection coverage and guide control prioritization. Use when building an ATT&CK-based coverage heatmap, tagging SIEM alerts with technique IDs, aligning security controls to adversary playbooks, or reporting threat exposure to executives. Activates for requests involving ATT&CK Navigator, Sigma rules, MITRE D3FEND, or coverage gap analysis.

0 0
Explore
autohandai/community-skills

hunting-for-spearphishing-indicators

Hunt for spearphishing campaign indicators across email logs, endpoint telemetry, and network data to detect targeted email attacks.

0 0
Explore
autohandai/community-skills

analyzing-malicious-url-with-urlscan

URLScan.io is a free service for scanning and analyzing suspicious URLs. It captures screenshots, DOM content, HTTP transactions, JavaScript behavior, and network connections of web pages in an isolat

0 0
Explore
autohandai/community-skills

implementing-zero-standing-privilege-with-cyberark

Deploy CyberArk Secure Cloud Access to eliminate standing privileges in hybrid and multi-cloud environments using just-in-time access with time, entitlement, and approval controls.

0 0
Explore
autohandai/community-skills

implementing-pam-for-database-access

Deploy privileged access management for database systems including Oracle, SQL Server, PostgreSQL, and MySQL. Covers session proxy configuration, credential vaulting, query auditing, dynamic credentia

0 0
Explore
autohandai/community-skills

detecting-t1003-credential-dumping-with-edr

Detect OS credential dumping techniques targeting LSASS memory, SAM database, NTDS.dit, and cached credentials using EDR telemetry, Sysmon process access monitoring, and Windows security event correlation.

0 0
Explore

Didn't find tool you were looking for?

Be as detailed as possible for better results